Origin |
Korea |
DVR (Drive Recorder) : ERD-200
Unlike other in-car recording systems, the T-eye Drive Recorder is used to record both video and audio data in a continuous loop fashion. If the vehicle is involved in an accident such as a collision, impact, and sudden acceleration-related incident, this data is marked and stored. One may there after analyze the data to find its root cause by playing back the scenes of interest and where acceleration, vehicle speed, direction, and location are available for review.
Continuous recording
The video and audio data from the front and interior views is continuously recorded while power on. when the capacity of the SD Card has been reached, the older files are overwritten by the latest file.
Pre and Post event recording
When impact or unusual acceleration or deceleration is detected by the built-in G-Sensor and has exceeded the preset limit or one activates the emergency record button, the recorded video data is locked-in and is erased only by an authorized party. Event data records 1 minute before and 1 minute after. (User may set pre-event time 1 minute, 2 minutes or 3 minutes). Stored event recordking data in SD card will not be erased unless suer cancels the event (in-car), or the files are erased by the person reviewing the SD card.
Night view recording with Ifra-Red Light
The included IR(Infra-Red) Light module with adjustment sued this invisible light source to assist in recording nighttime views from the interior facing camera.
Playback of video/audio data
The recorded data can be palyed back using the provided playback software which is found on the SD card. The Record resoluion is 640*480. Maximum 20 frames per second for 2 channels
Data analysis
The recorded data can be easily analyzed for speed, vehicle location and direction of travel including impact by using the T-eye Player that is found on conveniently on the supplied SD card.
|