Engine Start/Stop Button : HAPTIC BUTTON

Origin

Korea

※ Main functions of the product

1. Body sensing touch type engine start system

- Differently from existing general start button system, haptic button uses the best body reacting touch sensor so you can feel touch vibration on the end of finger when you touch the button.

2. First ACC/ON two way switching button system

- In general button system, it changes into ACC and OFF in order. However, haptic button uses two way switching system so that you can change ACC into ON or ON into ACC to drive conveniently as if you use normal car key.

3. 3 colored LED car condition indicating

- Through 3 color LED indicator of the button, it shows car condition by ACC, ON, START, OFF, SECURITY SET and RELEASE, so driver can recognize car condition easily only by seeing the indicator on the button.

4. Secrete lighting

- It uses advanced design concept to show letters of ENGINE, START and STOP only when opening door or touching the button but not shown normally (applying for black face button).

5. Antitheft (alarm function) and security lighting

- Security function will be released and button touch function is activated only if you open the door after sending Open signal by remote controller. If you close door by remote controller, antitheft function will be activated and red security LED will flickers on the indicator of the button. Now button touch and starting engine will stop.

6. Compatible with remote starting alarm and existing button

- It is compatible with remote starting alarm being used and can be compatible with main controller of haptic button and genuine button. You can use the function of remote starting and keep starting and alarm conveniently with the haptic button.

7. Start time adjustment and forced starting function

- You can start the engine at the suitable time for the car. Forced starting function which starts engine by running the start motor as long as touch for the vehicles which are difficult to start in winter season like LPG , diesel or old car.

8. Preheating/post-heating selection function

- Preheating/post-heating function is basically equipped and post-heating which will not be required after driving can be stopped easily.

9. Safety and self-diagnosis alarm system

- There are power monitering system and system protecting circuit in driving, it is possible to keep engine operating in any circumstance. If there is any problem on the system, it notifies driver of the problem through button and main module.

10. Newest firmware upgrade

- It is possible to improve or add the function of the product by upgrading of firmware. It can be used with the products issued later (remote starting, alarm, finger print recognizing system, smart key system) with simple connection.