HID Conversion Kit

Product Introduction

Our Michael HID Conversion Kit does not need to be exchanged due to damages in the filament Compared to the halogen lamp, it only uses up 35W(50% less electricity) whereas it illuminates up to three times more and five times more life than the regular version, satisfying fuel efficiency, high efficiency and safety.

More than half of the accidents that happen in the nighttime occur from inadequate lighting structures, and the older you get, you need as much as ten times more light than younger people. Our Michael HID is one that is closed to sunlight, and doesn't tire out the eyes. Night sight is greatly enhanced, and the driver can see for far ahead. Even through harsh weather conditions, it is effective in lefting the driver see the conditions of the road.

In addition, all circuits are linked with a jack to enable easy detachment, and with the integration of the ignition and the ballast, so it is implantable in small spaces. It is also perfectly waterproof to be safe in rainy weather and other water disasters. Our Michael HID Conversion kit is compatible for any type of car.

We will be able to satisfy the needs of the consumers for there is a wide variety of products that provide different brightness from 4,000 kelvens to 12,000kelvins.

Difference between HID and halogen

HID Conversion KIT

1. Item Available
   H1, H3, H4, H7, H8, H11, H13, H14(H/L), 9004, 9005, 9006, 9004/7(H/L)
2. Voltage(nominal): 9 to 16V
3. Working temperature : -40 to +105C
4. Wattage : 35W
5. Start voltage : 23KV

All types of HID bulb base

Color of the HID system
HID system presents the remarkable colors according to the mixture rratio of the gas filled up.

HID Kelvin and color temperature specification

HID System Structure

1. BULB : Xenon Gas inside the illumination device, the mercury Metal Halide Salts plasma discharge the molybdenum on each end to form energy and radiate light .
2. IGNITOR : A transformer of electromagnetism that gets the electricity from the ballast to light up Arc Light Source in all places, and delivers high voltage pulse to initialize the plasma discharge in the source.
3. BALLAST : An Electronic Control Unit that regulates the stable electricity flow to the valve and igniter during the Arc Initialization and Arc Regular condition stage. HID Conversion Kit is a tool to combine the two to enable installation of the HID onto the Halogen vehicle.

Visibility range and color of halogen lamp and HID system on the road surface

Brightness and radiance distance

Necessity of HID System

1. Elevation of brightness and illumination distance(3times)
2. Five times as long as halogen lamp's durability(semi-permanent)
3. 35KW of power consumption(Halogen : 55KW, 40% reduction)
4. Fast initial lighting
5. Close to natural light

Advantages of HID

Safety : White light(color temperature 4,200~12,000k) doesn't cause eyestrain even during long night driving.
Efficiency : Fuel efficiency increases(35K) with low power consumption
Long durability : Guarantees semi-permanent durability(3,000hours)
Ultraviolet rays interception : Prevents the emission of harmful ultraviolet rays
Convenient replace : It is possible to replace the lamp and ballast separately, which is convenient